Taggers now all painted with camo paint

   New for 2015  Laser Tag Nuke Prop
This is the latest device built for our group, this is a cut wire device where you have to decide what wire(6) to cut. Three do nothing, one disarms the wire cut, one disarms the timer and the other sets off the device alarm siren. There is also a IR sensor that triggers the time clock to go to double speed, when hit by the opposing team taggers.  The case has a built in Tracking device that can be tracked real time on Google Earth.  Still got the intermitting beep and the IR LED's to emit damaged to fit, but over all its starting to look the part. 
Video Link: https://youtu.be/gZ0UyWqNQZs

               The components used to build this were purchased from
 Patrick over at http://www.paintballprops.com/  if you tell him I recommended him and you'll get his special offer for all the main components needed, except Led chasers from ebay.  Also check out all the other great products Patrick has for sale.

    New for 2015      Laser Combat RPG

This is my latest add-on to our group's laser combat weapons, a home made RPG run on MilesTag, built from two sizes of waste water pipes and fittings plus a piece of timber, some bolts. Included is the Miles Core Board but you could use the smaller board if you wanted. All fitted together filled and painted.            Video Link:      http://youtu.be/DzuKQxeSeY4
  

         New Claymore Mine for Laser Combat 2015

Tested out my new Fibreglass Claymore Mine today, had a few wee teething problems, the tripwire cord was not strong enough and had to improvise on site by using the Para cord from my vest. The lever on the trip switch needed a bit of fine tuning, but over all happy with it. Scorpy

                        Link to short video:  Laser Claymore Test

Drawing of how to make the Claymore Mine Case in MDF Wood if you can't make a fibreglass one.    Click on photo to enlarge:

                                                                             

 

PIR Sensor and Tripwire

 MilesTag Gamesbox V3, reprogrammed to work with the PIR Sensor to trip the damaged to taggers, the reprogrammed board allows the user to set damage/ hits etc with the clone settings on the tagger.

Reprogramming work done buy

                          www.tagbits.co.uk - www.funwithelectrons.blogspot.com